If you are considering a sale of 500–2,000+ ton chillers in Chatham County, begin with the equipment you actually have and the conditions at the site. This guide addresses selling 500–2,000+ ton chillers in Chatham County: outdoor equipment assessment, including the information a buyer needs, practical removal constraints and the decisions a facility should make before releasing an asset. The business buys equipment only; it does not sell chillers.
Identify the 500–2,000+ ton chillers being offered
For equipment from 500 tons to 2,000 tons or more, identify each machine separately and use the nameplate capacity rather than the total building cooling load. Send the serial number, manufacturer, compressor and motor information, refrigerant marking and any drawings that show major components and their weights.
Historical overhaul reports, tube work and control or motor replacements can help explain the asset, but the lack of a complete history does not prevent a conversation. Note known damage and components that will be retained. An existing shutdown or uncertain operating status is not a reason to perform a test for the buyer.
Plan for outdoor equipment assessment
For outdoor equipment in Chatham County, provide photographs of coils, supports, panels and the base as well as the nameplate. Explain whether the unit has been exposed to weather during storage or operation, if known. Corrosion or damaged fins should be described as observed rather than translated into an unsupported estimate of remaining life.
Check the route from the pad or roof to a truck, noting fences, canopies and other equipment. If the site has restrictions on crane setup or ground protection, pass them along early. Refrigerant recovery and disconnects belong in the agreed buyer scope; the seller should not vent or open the system.
What affects the cash offer?
Large equipment often makes the removal route a major part of the commercial decision. Discuss clearances, floor load limits, staging space, possible disassembly and crane or heavy-haul access with the relevant site team. Establish who controls drawings and site permissions, and avoid promising a removal date until the scope has been reviewed.
In addition to the equipment itself, outdoor assessment can change the labor, equipment and time needed to complete a purchase. A useful comparison is the net amount to the seller together with the full written scope, not an attractive headline price with unexplained exclusions. There is no fixed price per ton in this guide: an offer follows a review of the individual machine and its circumstances.
Information to gather before requesting an offer
Start with clear photographs of the nameplate, the complete equipment and the surrounding access route. For 500–2,000+ ton chillers, add the manufacturer's model and serial number, rated tons, refrigerant, electrical rating and approximate dimensions or shipping weight if documented. Describe the equipment's present location and whether it is installed, isolated or stored. Explain any known damage, missing parts or significant service work without guessing about conditions you cannot see.
A short inventory should also list separate starters, drives, pumps, controls or other accessories and state which ones are included. Send available drawings and service records if you have them, but do not delay an inquiry merely because paperwork is incomplete. Identify the authorized decision-maker, site contact and desired release date. Avoid opening panels, disturbing pressurized components or putting equipment into operation for photographs.
From offer to payment and removal
After reviewing the details, the buyer can discuss a cash offer and the proposed scope for the specific equipment. Payment is upfront, before removal, under the agreed written terms; confirm the amount and payment method before accepting. No chiller testing is required. The offer should identify the assets being purchased and any conditions or access assumptions, so the seller can decide whether the transaction meets the facility's needs.
The buying service handles refrigerant recovery, disconnects, rigging or crane work as needed, loading, freight and hauling within the agreed scope. The site should coordinate access, operating approvals and its own isolation procedures with the responsible personnel. Recovery and other work must be planned for the actual equipment and applicable requirements; refrigerant must not be vented. Keep retained systems and neighboring property clearly outside the purchase unless explicitly included.
Confirm the handoff in writing
Before scheduling collection, review the outdoor assessment considerations alongside the lift route and equipment list. Confirm who authorizes entry, which connections are to be separated, where a truck can stage and what protection the site requires. If access, weight or the scope changes after the initial review, discuss the change before work proceeds. Preserve photographs, the accepted offer and the final equipment inventory in the facility's asset records.
Good preparation does not require a perfect maintenance file or a working machine. It means distinguishing documented facts from unknowns, disclosing constraints early and making sure the seller and buyer understand the same job. Ask for clarification whenever a price, payment timing, recovery step or responsibility for a retained component is unclear.
Questions to ask before you proceed
- Which serial-numbered machines and separate accessories are included in the offer?
- Is payment made upfront before removal, and what payment method will be used?
- Does the agreed scope include refrigerant recovery, disconnects, rigging, loading and hauling?
- What site access, operating approvals and isolation arrangements must the facility provide?
- How will shared equipment, occupied areas and the exit route be protected?
- What happens if the documented dimensions, access or equipment condition change?

